INA Cam Follower Bearing

Name: INA Cam Follower Bearing
Brand: V. W. IMPEX
Price: 2500 INR
Availability: InStock

Price 2500 INR/ Piece

Get a Price/Quote

MOQ : 4 Pieces

INA Cam Follower Bearing Specification

Product Type
CAM FOLLOWER

Bore Size
12.700 mm

Outside Diameter
10-90mm

About INA Cam Follower Bearing

INA Cam Follower Bearing including KR, KRE & KRV stud type Cam follower bearings, as well as NUKR & NUKRE type Cam follower bearings. They are all available in INA brand.

The outer rings of regular ball and roller bearings are typically mounted in rigid housings providing support around the entire circumference. Individual roller forces are transmitted through the outer ring directly into the housing with no major deformations.

By contrast, cam followers and yoke rollers are supported at a single point on their circumference. Individual roller forces produce bending moments on the outer ring around the point of contact. The effects are outer ring deformation with reversed bending stresses in dynamic applications, a reduced load zone, and a higher maximum roller load.

INA Cam Followers:

To keep deformation to a minimum, the outer ring of a cam follower must have a considerably heavier cross section than a standard bearing. This requirement conflicts with the desire for maximum dynamic bearing capacity requiring as large of a roller diameter as possible.

Tell us about your requirement